Comments on: How To Create A Wooden Print From A Digital Photograph

By: Fiorella Cornejo

Fiorella Cornejo — Wed, 06 Feb 2013 21:37:00 +0000

I have done it with magazine paper too and it works great, dont let the water soak too much at the end, if you notice the image rubbing, stop rubbing it, quickly clean the excess of water and move onto another section. good luck

By: Michael Lastrina

Michael Lastrina — Sat, 10 Nov 2012 05:46:00 +0000

check out http://www.woodsnap.com. They do high quality wood prints.

By: jhepfer

jhepfer — Thu, 04 Oct 2012 19:07:00 +0000

Love this! Definitely going to give this a shot.

By: Adam Kerr

Adam Kerr — Fri, 30 Dec 2011 23:21:00 +0000

Yeah.. but you could always flip the image in PS before printing

By: James Darden

James Darden — Fri, 21 Oct 2011 01:54:00 +0000

Wouldn’t any text come out backwards?

By: Eric Klasko

Eric Klasko — Thu, 20 Oct 2011 15:57:00 +0000

I tried this and the paper just rubbed right off in some spots, did i use too much or not enough gel medium?

By: Chad North

Chad North — Tue, 18 Oct 2011 18:28:00 +0000

inkjets wont work because it is water soluble..it will run off. Need to use laser

By: Chad North

Chad North — Tue, 18 Oct 2011 18:27:00 +0000

Its available at Joanns or Micheals, or any art store.

By: Chad North

Chad North — Tue, 18 Oct 2011 18:26:00 +0000

If you click on the link and actually go to youtube…it will tell you Laser prints works best. and in color also works. Its the tone that comes off onto the wood and sealed with modpodge. Hope that helps

By: Mr. Nuyoka

Mr. Nuyoka — Tue, 18 Oct 2011 00:31:00 +0000

I have found from other comments on you-tube that the reason for not using inkjet is because it is water based and will run when it comes in contact with the other liquids.

Here is another video done with Epson photo paper but as you can see its a lot harder to peal.

http://www.youtube.com/watch?v=H3Lb3jdjFW0&feature=related

“This method works great with LASER print copies, but not so much Ink Jet. The Ink Jet ink will smear, as it’s water soluable. Not sure why Modge Podge was used for the protective outer coating, when the Liquitex Gel she used would have sufficed. Liquitex products area available at any Michaels or Joann’s. Other products that will work with this are gel mediums from Golden. Available at the same stores.”