The Aviator Travel Jib: A Portable Jib For Video Shoots In Hard To Reach Places

My passion is shooting outdoor lifestyle and documentary projects, and those shoots often require me to be on the go and in remote areas. Historically, getting an expensive jib or crane in those locations was not possible. With the Aviator Carbon Fiber Travel Jib, taking a jib into the field is not only possible, but easy for everyone.

The Aviator Travel Jib is made by a company called Nice Industries, in both carbon fiber and mag alloy models. Aviator also makes a few other accessories like travel sliders and rails. These products started out of a Kickstarter project and have garnered great reviews from other filmmakers.

The Aviator Carbon Fiber Travel Jib is tailored for video shooters who need a lightweight, compact solution for jib shots. So whether you want to take it on a plane for a shoot overseas, or you need to carry it on a backpack for a shoot in the mountains, this jib can make the journey without weighing you down. This review will be specifically on the carbon fiber model.


Build quality

The build quality is great. The carbon fiber arms feel sturdy, the twist locks work as good as I would expect, and the base is robust. When fully weighted and extended, there is a slight bend in the arms, but it doesn't affect performance.

The locking screw for the counter weights is straight forward, and there’s a loop and carabiner for clipping on the included weight bag. Near the base is a bubble level and two locks– one for panning and one for tilting. Please note that these are only to lock movement, not adjust friction. The bag is fitted precisely to the jib, and has a small pocket for the screws and carabiner.

Aesthetically, the jib looks very nice. It has a very pro appearance despite being a smaller sized jib arm. It’s mostly black, with notes of red that come close to matching Zacuto gear.


It weighs about 3 pounds, and I've hiked, biked, and carried this thing all over. The weight it adds is hardly noticeable, and it doesn’t take up too much space either. Just keep in mind that you’ll definitely need a tripod, and likely a small ball head to get the most of your jib shots. If you’re like me and you carry a tripod with you anyway, then you’re all set.

Setting up the jib took a few times to get down, just to get a feel for the rig. It really helps to have an extra person holding an end while you balance it, but it is possible to do by yourself once you've gotten used to how it works. You absolutely want to weight the tripod down with your gear bag. This will help it stabilize. In the video, I’m using an Induro Carbon Fiber CT014, which has a small hook at the bottom of the pedestal rod for hooking on a bag.

The twist locks are helpful, but be careful not to lock them and then force the jib to move. Doing so will wear on the locks and eventually ruin them.

As noted in the video, using water bottles for the counter weight works great for me. Fine tuning the balance is a breeze by simply pouring out some water. I still use the weight bag with some rocks, but sometimes collecting rocks is not possible or impractical depending on your location. It totally beats carrying weights into the field though!

In operation, the moves are generally very fluid. There can be a slight wobble and the very high end, but that is common for manually operated jibs. Steady hands and proper balancing should eliminate most wobble issues.

You can mount the camera directly to the platform on the jib, but it’s better to use a ball head. The one I use is Manfrotto 494RC2. It’s small, relatively light, and super solid for DSLRs. Speaking of the DSLR, having a flip out LCD is helpful to monitor your shot! I’d also recommend looping the camera strap through the arms of the jib just in case.



Tightening the counter weight screw all the way in almost takes a minute by itself, and you can’t pack it with the screw on. Every time I use the jib I have to put the screw back on. It’s a minor thing, but it still annoys me.

The pan lock screw wasn't tightening as well as it should have out of the box, and it took me far too long to realize that you can actually lift the knob above the screw, twist it, and then reset it, thus tightening it. I didn't see any information about that in the manual. But who reads those anyway?

The locking screw for your tripod head can be tricky to get to, and if you’re panning the head and moving things around for a few different shots, make sure it’s still tight. Same for the base. I've had both of them come a little loose after shooting for a while


At $800, the carbon fiber model is $300 more than its mag alloy counterpart. Because of the material difference, the carbon fiber weighs about 1 pound less than the mag alloy. It’s not much, but if cutting weight down is important to you, it might be worth it. The only other difference is that the carbon fiber model is rated to support 7.5 pounds of camera weight, while the mag alloy is rated for just 6.5 pounds.

Compared to the Pocket Jib Traveler from Kessler, the Aviator Jib is certainly competitive with its price. The Kessler model weighs more, coming in at 5.5 pounds, and packs down to about the same size as the Aviator, at 27 inches. They extend to about the same length, but the Kessler can handle loads up to 10 pounds. The cost is $600, so a little bit cheaper, but at the expense of weighing more.

What I liked:
Very portable for a jib
Lightest weight in its class
Clean and thoughtful design
Comes with a bag that fits snug

What Could be Improved:
The bag could be just a touch larger to leave the screw on
$800 might be out the of budget for some

Closing Thoughts

I’m very pleased with this jib. I had a 12 foot Kessler Crane previously that didn’t collapse, and needed a ton of counterweights. There is no way I could have gotten shots in the field with it. The Carbon Fiber Aviator Travel Jib really makes getting unique camera moves in remote locations possible.

Mike Wilkinson's picture

Mike Wilkinson is an award-winning video director with his company Wilkinson Visual, currently based out of Lexington, Kentucky. Mike has been working in production for over 10 years as a shooter, editor, and producer. His passion lies in outdoor adventures, documentary filmmaking, photography, and locally-sourced food and beer.

Log in or register to post comments

does it really bend when loaded and in use, or is it just my eye? /:)

There was a slight bend, or flex, for me when fully extended and weighted... However it didn't affect performance from what I could tell. I did notice that by only extending each section to about 90% of its maximum length, I was able to eliminate any visible flexing.

Yeah, well, it seems like a good little item. I think the biggest + on it is that pan-base...btw, has anybody of you seen/tested/used the Ultra Travel Jib by Supamods? I'm curious of what that thing is capable of...

"Slight" isn't the word. There was a lot of flex for both units I had. I don't think they have a strong QA department as their manufacturing facility.

I need this. Looks awesome.

You need this.

Great, another item added to my ever-longing wishlist.

Neat! I have no idea what I'd shoot with that, but I want one!

Great review! Thank you SO much for including the bit about the jib not fitting in the bag unless removing the end part. I struggled trying to figure out why it wouldn't fit!!

800? yea no. That thing could be produced for MUCH less. Clearly photographay companies have horrible production factory deals.

It might be perceived value instead of actual production value.

Exactly why it's a no.

there's a carbon clone on ebay for $200; same quality and design

Here's a new Jib that will be coming out at the end of the month from Digislider.

Carbon Fibre and for around $280 - $350 / £208 - £ 250 /

See link for details -

The compactness of this jib is tempting, but I wish it was slightly less expensive and could support a few more pounds.

Building one would be cheaper. Ok, It's portable, but it still overpriced.

For a professional shoot, I'd deffinitely stick with the Kessler Pocket Jib.

This is a pretty simple design. I don't feel like it's worth the money. Carbon also tends to bend a lot. I own the Kessler Pocket and it has a lot of handy feature that this one lacks. If you're going to buy a pocket jib for a professional shoot, I'd stick with the Kessler.

The Kessler Pocket Jib Traveler was my #2 choice. In the end, the weight difference between the two was the deciding factor for me. If I wasn't always hiking around with a bag full of gear, it might have been a different story. And if I had sherpas to carry gear for my shoots, I'd have gone with their $1200 pocket jib :-)

would be more interesting w/ a comparison to Kessler's Pocket Traveler Jib...

You know, I have to say, I own the Carbon Fiber unit and I was definitely not impressed. I've gone through two units and the build quality was sub par at best. The braking mechanism on the fulcrum feels like an afterthought and both units I've had were never thoroughly cleaned after machining, which lead to jagged movements when pivoting. It was definitely not worth $800.00.

I also own the carbon fiber unit. I bought it early on. The braking mechanism isn't a brake, but a lock, which of course... everyone will try and use as a brake. It was the first thing we all did on the first production I used it at. It is flimsy and not a brake. I ended up removing it. The bag is also too small... just a cheap bag that was a poor design. I was, like the reviewer, annoyed at the counterweight screw not fitting the length of the bag, installed.
As for usage, I have had a C300, unloaded of peripheral crap, fly on this rig. It is maxed out, but it works with attention. A 5D is perfect for it, which is why I wanted it. It can bounce some while flying, so it isn't rock solid. But, it is also super lightweight... so I didn't expect it to be a steel I-beam.
Bottom line: worth the price, fun to use, better than a slider, adds another layer of awesome to a video which = happy clients. Paid itself off in a week.

Has anyone compared the Aviator jib to Lite Pro Gear's Feather Camera Crane? It looks like the Feather crane is lighter, made of carbon fiber, and has a 10' boom which is a lot longer than the Aviator's 6'. From what I saw in their product video (, Lite Pro's jib looks like a better design as well in terms of breaking down and fast set up. The price points are pretty similar between these two jibs, I'd love to get some input from anyone that has used the Feather jib so I can figure out if that is the one I should buy or not. I bought a Kessler last year to add production value to the events I was shooting, but I sold it because it was way too heavy and cumbersome to use, and the boom wasn't even as long as the one on the Feather crane. The Aviator crane looks flimsy and I am worried I would not be able to fly my set up (about 7.5lbs). The Feather crane says it can fly a 10lbs payload, which would cover most of my usual work set ups. Any thoughts would be greatly appreciated.

Ted, I actually recently got to use the Lite Pro FCC. I was impressed by its lightweight, how much it compacts down, but also it has a significant reach. I haven't compared pricing, but it is a solid piece of gear.